The AD Access combines economic ownership with performance to match the small laser user. A three-stage filter condition indicator is included as a standard feature, together with three stage filtration: DeepPleat pre-filter, HEPA and chemical section.
The Electro-Hydraulics Training System (85-EH) teaches electrical relay control of industrial hydraulic applications. Learners will study industry-relevant electro-hydraulic skills including operation, installation, performance analysis, and design. The electro-hydraulic training system can be used with Basic Hydraulics (85-BH) or any Amatrol learning system that includes the Basic Hydraulics training system. Electro-Hydraulics can also optionally be used with Intermediate Hydraulics (85-IH).
The Electro-Hydraulics training system includes an electrical control panel with relay control components and an electrical valve module with solenoid-operated hydraulic directional control valves and electrical / electronic sensors. These components will be used to study a variety of topics including electrical control systems, basic control devices, power devices, control relays, sequencing control, timer control, pressure control applications, and circuit applications.
Amatrol’s Electro-Pneumatics Learning System (85-EP) adds to the Basic Pneumatics Learning System (850-P1) to teach electrical relay control of pneumatic systems and their industry applications. Learners will study industry-relevant skills related to these topics including operation, installation, performance analysis, and design.
The 85-EP provides students with the components to set up a variety of industrial relay control circuits using ladder diagrams and Boolean logic. Relay control is a fundamental building block in the study of automation since programmable controllers and solid state controls also use the same programming methods.
The model 85-EP includes an Electrical Control Module with relay control components, Electrical Valve Module with solenoid operated pneumatic directional control valves and electrical/electronic sensors, lead set, student curriculum for both theory and lab, student reference guide, and an instructor’s guide.
The Grid-Tie Learning System – Solar (85-GT1) features real-world components that are commonly found in commercial and residential environments to help make learners job-ready and prepares them for certifications. For example, the 85-GT1 is equipped with a Photovoltaic Combiner box and a multiple panel solar array, allowing learners to connect panels in series and parallel; an Iskra ME162 single-phase meter that measures and registers electric energy in single phase two-wire networks using globally-recognized products; and an Enphase Solar Microinverter that helps students understand converting DC generated by a single solar module to AC.
Amatrol’s Intermediate Hydraulics training system (85-IH) introduces advanced hydraulic components (pilot-operated check valves, two-position directional control valves, telescoping cylinders, etc.), explains how each works, and then shows how they relate to real-world applications in elevators, punch presses, backhoes, and many more. This approach to curriculum is an Amatrol signature: reinforce both theory and practice to produce a well-rounded understanding of the topic. Learners will be able to understand concepts like pressure intensification and cylinder regeneration while also being able to operate, install, design, and troubleshoot hydraulic components.
Intermediate Hydraulics includes directional control valves, relief valves, a flow control valve, a check valve, and an accumulator. Amatrol training systems use industrial-grade components displayed on hand-welded, painted and silk-screened panels, and workbenches made from top-flight materials. This precise attention to quality and detail ensures a tough, visually appealing, user-friendly design that will last for years and help learners gain experience with components they’ll actually see on the job.
The skills and principles offered in Intermediate Hydraulics build on the fundamentals taught by the Basic Hydraulics (85-BH), but also lead to additional, more advanced learning systems such as Advanced Hydraulics (85-AH) and Electro-Hydraulics (85-EH). The advanced hydraulics training system teaches learners about hydraulic performance analysis and maintenance, while the electro-hydraulics training system (which is used in several exercises with the intermediate hydraulics training system) introduces electrical relay control of hydraulic systems.
Amatrol’s Intermediate Pneumatics Training System (85-IP) builds on basic pneumatic skills by introducing more advanced concepts such as air logic, ways to decelerate a pneumatic cylinder, and how to prevent condensation in a pneumatic circuit. Learners will have the opportunity to study these concepts while working with a hands-on training module, which enables practicing skills such as connecting and operating a two-way valve and changing an air filter element; this approach of simultaneously teaching theory and practice reinforces each element and results in a thorough understanding of the topic.
The Intermediate Pneumatics training system includes directional control valves, check valve, pneumatic cylinder, Venturi block, assorted filter elements, and much more. Amatrol’s commitment to using top-flight, industry-standard materials ensures that learners work with components they’ll actually see on the job. This attention to quality and detail culminates in a durable, attractive, user-friendly industrial training system that will last for years.
After completing the Intermediate Pneumatics curriculum, learners can continue to build on these skills by moving on to Amatrol’s Advances Pneumatics (85-AP) and the Pneumatics Troubleshooting (950-PT1) training systems. Advanced Pneumatics covers topics such as motor loads, pneumatic cylinder loads, and quick exhaust valves, while Pneumatic Troubleshooting is the first product to offer a realistic troubleshooting experience for learners because the faults are inserted throughout the system.
Amatrol’s Basic Electrical Machines Learning System (85-MT2) teaches electric machines commonly found in industrial, commercial, and residential applications: single phase AC motors, three-phase AC electric motors, and DC electric motors. Learners practice industry-relevant skills including operation, installation, analyzing performance, industrial motor wiring, and selecting electric machines for various applications.
The 85-MT2 features a number of industrial machines, including an AC multi-purpose single phase motor, a split phase motor, a DC motor/generator, and a 3-phase induction motor. This learning system also includes an integrated base test unit, lead set, prony brake, handheld clamp-on multimeter, handheld digital multimeter, world-class curriculum, and a student reference guide. This system uses industrial quality wiring schematic components both to help learners become better prepared for what they will encounter on the job and to withstand frequent use.
Amatrol’s DC Generators Learning System (85-MT2B) teaches industry-relevant DC generator skills, including how to operate, install, analyze performance, and select generators for various applications. A generator is a device that creates DC electricity and can be found in diesel locomotives, as well as aircraft and marine systems. The DC generators training system requires the Basic Electrical Machines Learning System (85-MT2), as well as 208 VAC/60 Hz/3 phase power.
This industrial motor training system includes resistive load and inductive load units that connect to the DC generator supplied with the 85-MT2 to provide operation under various types of loads. Learners will use these components to study topics such as DC series generators, DC shunt generators, and DC compound generators. Amatrol learning systems feature a perfect combination of theoretical knowledge and hands-on skill building to reinforce each in a learner’s mind and strengthen comprehension for more advanced skills.
Amatrol’s Alternator/Synchronous Motor Learning System (85-MT2C) adds to the Basic Electrical Machines Learning System (85-MT2) to teach skills related to alternators and synchronous motors commonly found in industrial applications. Alternators provide a mobile source of AC electrical power while synchronous motors reduce power costs by correcting the overall power factor in a plant. Learners will study industry-relevant skills in industrial motor training, including how to operate, install, and analyze the performance of alternators and synchronous motors.
The alternator and synchronous motor training system includes capacitive load, combination synchronous motor/alternator, and synchronizing lights/switch units. The capacitive load unit combines with the 85-MT2 to provide operation under various types of loads. In addition to industrial components, this training system includes in-depth curriculum, an instructor’s guide, and a student reference guide. The highly-interactive, multimedia curriculum covers major topical areas such as alternator output voltage and frequency, three dark synchronization method, and reversing a synchronous motor.
Amatrol’s Wound Rotor Motor Learning System (85-MT2D) covers the function, operation, and performance characteristics of wound rotor motors. While variable frequency drives (VFDs) and standard induction motors have replaced wound rotor motors in many applications, these motors are still used for heavy-duty, high torque applications such as industrial cranes and hoists. Amatrol’s wound rotor motor training system requires the Basic Electrical Machines Learning System (85-MT2) for use.
Wound rotor motor training includes a wound rotor speed controller, a wound rotor motor, banana leads, in-depth multimedia curriculum, an installation guide, and a student reference guide. These components will be used to study topics such as wound rotor speed control, performance characteristics, and motor reversing. Amatrol systems feature real-world, industrial-grade components for both durability and to facilitate learners in gaining hands-on practice with actual equipment that they’ll find in the field.
Amatrol’s Electric Motor Troubleshooting Learning System (85-MT2E), used in conjunction with the required Basic Electrical Machines Learning System (85-MT2), covers AC and DC motors troubleshooting and testing using a multimeter and a megger meter. The skills and knowledge covered by this system will prove invaluable for industrial maintenance technicians or anyone working in a field that uses AC and/or DC motors. This system covers major topics like AC and DC motor failures, common methods of diagnosing these failures by using a multimeter and megger meter, and troubleshooting these failures.
The 85-MT2E includes a motor connection box to practice hands-on skills, such as troubleshooting faults in a DC motor and AC single-phase and three-phase motors, evaluating DC electric motor commutator and brush health, and using a multimeter to test an AC motor start/run capacitor. Amatrol’s industrial training systems feature real-world, industry-grade components for durability that will stand up to frequent use and to allow learners to gain real-world competencies.
Pages
-
-
The Advantage Base 1 Oracle has been designed so that a number of manufacturer’s laser engravers can sit on top of the extractor, effectively doubling it up as a workstation.
All the Base units in the range have the option of an onboard compressor for a compact installation. BOFA’s ‘Easi-Seal’ filter location makes filter change easy, quick and safe.
The revolutionary Auto-Voltage Sensing Turbine automatically self-adjusts to run on any voltage worldwide, whilst the Reverse Flow filter technology enhances filter performance and ensures longer filter life.
-
The Laser Companion 'Ride On' range has been designed so that a number of manufacturer's laser engravers can sit on top of the extractor, effectively doubling it up as a workstation.
The Advantage Base 2 Oracle has been designed so that a number of laser engravers can sit on top of the extractor, effectively doubling it up as a workstation.
All the Base units in the range have the option of an onboard compressor for a compact installation. BOFA’s Easi-Glide filter location mechanism makes filter changes easy, quick and safe.
-
The Advantage Base 3 has been designed specifically for the Universal VersaLaser engraver. The dimensions of the unit allow the VersaLaser to fit perfectly onto the extractor, effectively doubling it up as a workstation. The unit is also offered with an onboard air compressor to provide the laser with its air assist requirements and comes complete with extraction hose kit and compressor link up on compressor models.
-
The Advantage Base Z has been designed specifically for the new Epilog Zing laser engraver. The dimensions of the unit allow the Zing to fit perfectly onto the extractor.
-
The AD GoldSEAL RS is a dust extraction system designed for the jewelry industry that recovers and collects precious metals.
The metal particles are collected in an easy to remove tray and the HEPA filter can be incinerated to reveal the precious metal collected in the filtration process.
Automatic Flow Control allows the user to preset correct air flow rates, for lower noise levels and allow further protection of the HEPA filter.
-
The AD Universal fume extraction and filtration system has been designed to provide cost-effective solutions for light to medium duty applications. These compact systems are ideal for small-scale industrial environments and light laser coding applications. -
High school students are destined to become knowledge workers, regardless of whatever specific career choice they make. Engineering and technology offer some of the most rewarding career opportunities possible! Amatrol’s high school programs are designed to engage students who demand a high degree of interactivity and challenge to keep them interested and learning. All of our high school programs articulate to colleges for up to 18 credit hours.
-
Item Number:890-PEC-BThe model 890-PEC-B Programmable Controller Troubleshooting Learning System teaches programming and troubleshooting of programmable controllers and their use in industrial, commercial, and residential applications. The 890-PEC-B System teaches PLC troubleshooting like no other product by providing a hands-on learning station that models real world PLC-controlled machines with up to 40 faults that can be inserted into the system. -
Amatrol’s fluid power training systems are the best in the industry. Our learning programs are developed in partnership with industry and education to ensure that the skills are on target to support modern industry needs.
