Train fire and EMS drivers safely with the Acron Aviation FireSim™ Series 8 Simulator. Includes emergency response scenarios, vehicle configuration options, and Replay Studio™ for after-action reviews.
Offering a variety of production-grade thermoplastics, FDM® technology creates parts that are highly accurate, tough, and suitable for both functional prototyping and end-use parts. ABS is the most common material used as it boasts good mechanical properties and high name recognition. Compared with ASA, ABS may be more familiar because of its popularity in mass production.
ASA is another popular all-purpose material for jigs and fixtures, manufacturing aids, prototyping and limited-run end-use parts. ASA matches or exceeds the mechanical properties of standard ABS and has greater heat resistance. Moreover, ASA demonstrates exceptional UV stability and, with its matte finish, offers the best aesthetics of any FDM thermoplastic. It’s especially suited for end-use parts in outdoor commercial and infrastructure applications, and its wide array of color options surpasses that of ABS.
FDM® TPU 92A is a thermoplastic polyurethane with a Shore A value of 92. The material exhibits high elongation, superior toughness, durability, and abrasion resistance.
FDM TPU 92A brings the benefits of elastomers to FDM 3D printing and can quickly produce large and complex elastomer parts. Typical applications include flexible hoses, tubes, air ducts, seals, protective covers, and vibration dampeners.
FDM TPU 92A is available on the F123™ Series 3D Printers and is compatible with QSR™ soluble support material.
Produce Large and Complex Elastomer Parts
Create accurate elastomer parts quickly and efficiently with the ease and reliability of professional FDM 3D printing. The durable elasticity of FDM TPU 92A material makes it a good choice for a variety of applications, including flexible hoses, tubes, air ducts and vibration dampeners.
FDM® HIPS (high-impact polystyrene) is a low-cost, general-use 3D printing thermoplastic. It offers similarities to ABS but has high impact resistance making it suitable for printing lower-requirement jigs, fixtures, and prototypes at a reduced cost.
Kimya PC-FR is a polycarbonate FDM® 3D printing filament with flame-retardant properties developed specifically for additive manufacturing. It retains the beneficial characteristics of standard polycarbonate, such as dimensional stability, high glass transition temperature, and high impact resistance.
Kimya PC-FR is a polycarbonate (PC) based material with flame-retardant properties developed specifically for additive manufacturing. It retains the beneficial characteristics of standard polycarbonate such as dimensional stability, high glass transition temperature, and high impact resistance.
Key Attributes
- Flame-resistant material
- Electrical insulator
- Good dimensional stability
- Meets or exceeds the mechanical performance of Stratasys PC material
- Compatible with soluble support
- Meets EN 45545-2 and NFPA 130 standards
- Slice heights: 10
Nylon 12 is a semi-crystalline, FDM® thermoplastic. As with other semi-crystalline materials used in traditional manufacturing processes, special considerations should be implemented to ensure an optimal part is obtained. The information in this document illustrates the following considerations:
- Tip Selection
- Build Modes
- Porosity
- Sacrificial Tower Features
- Build Sheets
- Support Removal
- Annealing
FDM® Nylon 12 filament is the 3D printing equivalent of standard industrial PA12 (polyamide 12) material. A strong engineering thermoplastic that exhibits toughness and high impact strength without being brittle. Its excellent fatigue properties make it a good option for repetitive-flex applications such as snap-fit clips, closures, and press-fit inserts.
Other applications include jigs, fixtures, low-volume production parts, and accurate prototyping of nylon 12 high-volume injection molded parts. FDM Nylon 12 is available in black.
FDM® Nylon-CF10 is a composite material combining a blended nylon polymer with 10% chopped carbon fiber (by weight), enhancing the material’s strength and rigidity. The nylon base polymer also gives FDM Nylon-CF10 good chemical resistance.
FDM® Nylon 12CF™ is a PA12 (polyamide 12) thermoplastic filament reinforced with chopped carbon fiber, 35% by weight. It has the highest flexural strength of any FDM thermoplastic, resulting in the highest stiffness-to-weight ratio. The combination of high strength, stiffness, and light weight makes it an optimal replacement for heavier metal components in appropriate use cases.
Typical applications include strong, lightweight tooling, functional prototyping and select end-use parts.
Pages
-
-
The primary goal of this course is to teach workers the correct procedures to follow in a potential bloodborne pathogen event. The Bloodborne Pathogen VR simulation is ideal for future employees or supervisors who will work in hazardous environments where a potential bloodborne pathogen event may occur. -
VR Hard Hat's First Aid: CPR & AED course aims to equip participants with the knowledge and hands-on skills required to effectively administer CPR and operate an AED during cardiac emergencies. -
The Lucas-Nuelle training system allows first responders to practice the correct procedure for recovering hybrid and electric vehicles over and over again - until it becomes muscle memory, ensuring maximum efficiency even when working under time pressure. -
Item Number:295-203DAC Worldwide's Fixed Head Bulk Storage Tank Model (295-203) is a highly detailed scale model of a conical-roof, fixed-head storage tank. -
Item Number:226-000DAC Worldwide’s Flange Bolt Torquing (226-000) is a training package that includes a complete assortment of fixtures, tools, accessories, and technical data for training in proper bolt torquing using an eight-bolt pattern. -
Item Number:225-000DAC Worldwide’s Flange Bolt Torquing Trainer (225-000) is a heavy-duty learning aide that allows for in-depth training in bolted joint torquing, gasket selection/usage, and torque wrench usage. -
Item Number:225-PACDAC Worldwide’s Flange Bolt Torquing Training System Plus (225-PAC) is a heavy-duty learning aide that allows for in-depth training in bolted joint torquing, gasket selection/usage, and torque wrench usage. -
Item Number:864-PACDAC Worldwide’s Flange Sample Board (864-PAC) provides a hands-on teaching aid for piping system training, pipe fitting training, and process operations training. This industrial process system training supplement includes 15 different types of flanges on two rack-mounted panels with magnetic identification tags. -
Item Number:294Hands-On Technical Trainers
