The Acron Aviation TranSim™ truck driving simulator delivers immersive, risk-free training for commercial drivers. Explore over 125+ training scenarios, realistic vehicle dynamics, and performance feedback with Replay Studio™.
Somos® PerFORM™ produces strong, stiff, high-temperature-resistant composite parts that are ideal for tooling and wind-tunnel testing applications. With the lowest viscosity of any composite stereolithography material, parts made from Somos PerFORM are faster to build, easier to clean post-process, show superior sidewall quality, and provide unmatched detail resolution.
When you need a high-heat and humidity-resistant material for your parts, Somos® ProtoGen 18420 delivers the performance you need with accurate, easy-to-clean white parts.
Somos® ProtoGen 18420 helps our customers produce various part properties based upon the machine exposure that fit various applications.
Somos® ProtoGen™ 18420 was the first resin in stereolithography to demonstrate varied material properties based on machine exposure control. Now you can tailor parts to fit your unique needs, which makes it perfect for applications in the automotive industry and consumer products and electronics.
A fast-building stereolithography material specifically designed to deliver high-temperature resistance with exceptional surface finishing.
Somos® ProtoTherm 12120 stereolithography material is an excellent solution for applications requiring resistance to heat and humidity.
Somos® ProtoTherm 12120 excels at producing highly detailed, extremely accurate parts. The material is dimensionally stable when exposed to heat and humidity. It is a good candidate for high-temperature fluid flow analysis, functional prototypes, and limited-run, non-critical end-use parts such as wiring harnesses and support connectors in electronic devices.
For the automotive and aerospace sectors, our Somos® ProtoTherm™ 12120 materials deliver high-temperature resistance with exceptional surface finishing — a perfect combination for simplifying wind tunnel trials. This resin also offers superior dimensional stability, making your parts robust for testing.
A robust material with an unparalleled thermal and mechanical performance combination.
Somos® Taurus brings a combination of thermal and mechanical performance that previously was not possible with stereolithography materials. Its robustness combined with a charcoal gray appearance makes it ideal for the most demanding functional prototyping and end-use applications. Parts printed with this material are easy to clean and finish. The higher heat deflection temperature of Somos® Taurus increases the number of applications for the part producer and user.
Somos® TaurusTM brings the combination of thermal and mechanical performance that until now was not possible with stereolithography materials. Its robustness combined with a charcoal grey appearance makes it ideal for the most demanding functional prototyping and even end-use applications.
An optically clear stereolithography material tailored for colorless, functional parts with excellent temperature resistance.
Somos® WaterClear Ultra 10122 is an optically clear stereolithography material that is easy to use and fast to build. This material produces colorless, functional, and accurate parts that simulate an acrylic appearance. Parts produced with Somos® WaterClear Ultra 10122 exhibit excellent temperature resistance.
Somos® WaterClear Ultra 10122 is ideal for applications such as master patterns, concept, and functional models. This material also provides refractive values similar to engineered plastics for functional testing in optical light transmission work.
Somos® WaterClear® Ultra 10122 is an optically clear stereolithography material that is easy to use and fast to build. This stereolithography material produces colorless, functional, and accurate parts that simulate an acrylic appearance. Parts produced with Somos WaterClear Ultra 10122 exhibit excellent water and temperature resistance.
Somos® WaterShed AF is a multi-purpose stereolithography resin that meets the requirements for investment casting patterns. With processing and properties similar to Somos® WaterShed XC 11122, this resin can also be used for general-purpose prototyping and other applications.
Pages
-
-
The Acron Aviation TransitSim™ Bus Simulator delivers realistic training for transit operators, reinforcing core bus-driving skills in a risk-free environment with immersive visuals and Replay Studio™ review tools. -
Item Number:295-723DAC Worldwide's Treater Dump Valve Cutaway (295-723) is a sectioned industrial specialty oilfield valve for training in the operation, construction, and maintenance of on-off type dump valves. -
The primary goal of this course is to teach workers safe procedures for working in and around a trench environment on a construction site. Hard Hat VR's Trenching and Excavation Simulation is ideal for future employees or supervisors who will work in or around trenches on construction sites. -
Item Number:CO3221-7DTo prepare students for electrification of the powertrain in commercial vehicles, the renowned HV training system for passenger cars from Lucas-Nülle has been modified and adapted. The special learning concept of the training system, which combines theoretical and practical content in a target group-oriented manner, enables flexible on-site implementation that is taking regional, operational, and industry-specific features into account. -
Item Number:CO3221-7FThis training system from the TruckTrain series focuses on the topic of "Smart Farming 4.0" based on the ISO bus. Special attention is paid to the function of "Precision Farming with Section Control", which is implemented in the hardware in a practical and interactive way. -
A compact 2-axis CNC Lathe with totally enclosed high-visibility interlocking guard, suitable for all levels of education and training. Programmable spindle speeds and feedrates make the Turn 270 PRO ideal for cutting a range of resistant materials such as wax, plastic, acrylic, free cutting alloys, aluminum and steel. -
Learn about the Turn 370 Pro CNC Lathe, a high-capacity 2-axis machine perfect for educational and training programs requiring precision and durability. -
Item Number:285DAC Worldwide’s U-Tube Heat Exchanger Training Model (285) depicts a highly-detailed scale model of a common u-tube heat exchanger in a technically-accurate, professionally-crafted design. Based on a common make and model of a heat exchanger that reflects design standards established by the Tubular Exchanger Manufacturers Association (TEMA) and the ASME. -
Item Number:CPK-UAM2-001Immerse your students in STEM with the thrill of UAV (Unmanned Aerial Vehicle) competitions. The kit introduces students to drone building and programming, with a focus on the classroom, community, statewide and national competitions. It includes a UAV frame, replacement parts, and a full library of sample programs to quickly get started. This fun, team-based setting inspires students to pursue STEM-based careers.
