DAC Worldwide’s Pneumatic Component Cutaway Set (760) is a tabletop assortment of industrial pneumatic components that have been modified for classroom use as teaching aids for pneumatic component training.
Simlog Off-Highway Truck Personal Simulator's Complete Haul Cycle 2 Module has trainees drive the truck from the dumping zone to the wheel loader. After the truck is fully loaded by the loader, return the dumping zone, dump the load and drive away.
Simlog's Reach Lift Truck Personal Simulator: Slalom 1 Forward Driving - pick up the load, drive forward through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Slalom 2 - Pick up the load, drive in reverse through the slalom course, and place the load on the floor at the target position defined by a red outline.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks 2, Standard Aisles - Working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog's Reach Lift Truck Personal Simulator: Selective Pallet Racks, Narrow Aisles - working with selective pallet racks, pick up each marked load and place it at its target position, using the overhead map for guidance. The loads and their target positions are mixed among the various heights of rack shelves.
Simlog Mining Truck Personal Simulator - Corridor Driving Module: Trainees drive the truck through the corridor to the target. The trial ends when the truck is over the target and parked (gear in Park or Neutral with parking brake engaged).
Simlog Mining Truck Personal Simulator - Complete Haul Cycle 1 Module: Trainees drive the truck from the dumping zone to the rope shovel and position the truck under the dipper (the shovel's horn will sound when the truck is appropriately positioned).
After the truck has been fully loaded (the shovel's horn will sound when the loading is complete), return to the dumping zone, dump the load and drive away.
Simlog Electric Rope Shovel - Following Grade Module: make the rightmost dipper tooth follow the line (the cursor changes color as the tooth moves away from the line). The trial ends when the tooth reaches the end of the line, and the operator activates the horn.
Simlog Electric Rope Shovel - Single-Pass Digging Module: Fill the dipper by digging at the rock face. The trial ends when there is material in the dipper, the dipper is no longer in contact with the rock face, and the operator activates the horn.
Simlog’s Bulldozer Personal Simulator puts students behind the controls of a medium-sized Bulldozer as they experience the reality of a typical construction site. The virtual work site features dynamic terrain with life-like dirt pushing and spreading.
Training efficiency is delivered through a modular Instructional Design that teaches real skills for productive and safe equipment operations in the field.
Pages
-
Item Number:760C -
Item Number:295-713DAC Worldwide’s Pneumatic Level Controller Assembly Cutaway (295-713) is a sectioned, highlighted float-operated pneumatic level controller assembly that allows for realistic demonstration and training related to this common level control device used in oil and gas production operations. -
Item Number:295-722DAC Worldwide's Pneumatic Level Switch Cutaway, Oilfield-Type (295-722) is a realistic, sectioned example of a common industrial level switch, as used in oilfield production applications and other process systems. -
Item Number:295-719PDAC Worldwide’s Pneumatic Surface Safety Valve Cutaway (295-719P) depicts a sectioned full-size valve sample. A key component in ESD systems, these safety-related wellhead components ensure system shutdown in emergency circumstances. -
Item Number:950-PT1Hands-on pneumatic troubleshooting training with real-world faults. Amatrol’s 950-PT1 uses FaultPro® to teach pneumatic, mechanical, and electrical system diagnostics. -
Item Number:27-PNA1Amatrol’s Pneumatics 1 Assessment Workstation (27-PNA1) features a compact workstation designed to effectively assess hands-on pneumatics skills with a variety of industry-standard components. -
Item Number:990-DRV1FAmatrol's 990-DRV1F features industry-standard components like a Rockwell PowerFlex 4 variable frequency AC drive and a 3-phase AC motor used to teach the fundamentals of configuring and operating an AC drive. The 990-DRV1F uses FaultPro, Amatrol’s electronic fault insertion, to teach motor drive troubleshooting skills, such as drive input, motor input, and drive relay troubleshooting. -
Item Number:990-ACDC1With the 990-ACDC1 learning system, you can teach the basics of AC and DC electrical systems in industrial, commercial, agricultural, and residential applications. The system offers industry-relevant skills including how to operate, install, design, and troubleshoot fundamental AC and DC electrical circuits for various purposes. -
Item Number:616-000DAC’s Portable Calibration Training System (616-000) is a portable tabletop instrument calibration workstation that allows for convenient testing and calibration of instruments, process controllers, and other instrumentation and process control-related components. -
Item Number:990-MC1FSLAmatrol’s Portable Electric Motor Control Troubleshooting Training System (990-MC1FSL) features typical industry components like a 3-phase AC squirrel cage motor. It uses 3-phase AC for power and 24 VDC for control, all packed within a space-saving, portable product. The real-world motor control components will prepare learners for work in industries where electric relay control applications are used, like conveyor control and driving large utility pumps. Teach students how to read and interpret ladder diagrams.
