The AM-CERT cell was specifically designed for Advanced Manufacturing training. Learn robot to PLC interface, PLC ladder logic, operator interface, safety, mechatronics, and iRVision all in one cell. Certified for Material Handling, Level II and III Training.
The Lucas-Nuelle CX3226-1A7 is a practical training system for teaching safe high-voltage isolation and lockout/tagout procedures for battery-electric, plug-in hybrid, and hybrid-electric vehicles.
Students learn to identify electrical hazards, choose an appropriate isolation method, verify that the vehicle is safe to service, investigate simulated faults, and recommission the vehicle after work is complete.
Designed For
- Vocational schools and community colleges
- OEM, fleet, and workforce training centers
- High school automotive programs
- Recognize electric-vehicle high-voltage hazards
- Become proficient with methods of vehicle isolation
- Investigate faults and system status
- Verify safe working conditions
- Reinitialize and recommission vehicles safely
Scan Tool Simulation
An integrated interface supports fault insertion and simulates a scan tool with diagnostic trouble codes and live data.
Multiple High-Voltage Isolation Methods
Training covers Live-Dead-Live measurements, manual service disconnects, 12-volt disconnection, cutting loops, high-voltage fuses, smart-key storage, scan-tool shutdown, and warnings for incorrect operation.
Simulated High-Voltage Circuit
The system represents an HV battery, contactor operation, high-voltage interlock loop, drive motor, DC/DC converter, and equipotential bonding circuit.
Guided Learning
Guided instruction modes and assessment activities reinforce correct procedures and decision-making.
Use of Real Workshop Tools
Students practice safety procedures using the same types of equipment used when servicing real vehicles.
Original Components
Authentic automotive components support safe, repeatable high-voltage training.
- High-voltage awareness
- High-voltage isolation methods
- Lockout/tagout procedures
- Safe-work-condition verification
- Diagnostic trouble code and fault investigation
- Safety decision-making
- Complete vehicle isolation and lockout/tagout
- Scan-tool shutdown
- Incorrect isolation procedure
- Procedure-validation failure
- Vehicle recommissioning verification
- High-voltage interlock fault investigation
- Equipotential bonding fault investigation
- Residual voltage after isolation
- Active insulation fault
- Unknown contactor status
- Collision-damaged vehicle assessment
- Authorization-limit recognition
- Unsafe-work-condition recognition
Some exercises may require separate testing equipment.
- Four-wire Kelvin milliohmmeter with a test current of at least 200 mA, resolution of 1 mOhm or better, and a pass threshold below 0.1 ohm
- Insulation and voltage tester or megohmmeter supporting 500 V and 1,000 V DC, a range of at least 200 MOhm, and a CAT III or CAT IV 1,000 V rating
Pages
-
Item Number:AM-CERT -
Item Number:203E-PACIndustrial maintenance technicians must learn to operate, maintain, troubleshoot, and repair a wide variety of mechanical systems used to manufacture products. One of the key diagnostic tools technicians will use during preventive maintenance as well as to maintain optimum efficiency is vibration analysis. -
Item Number:278-180DAC Worldwide’s Air Operated Diaphragm Pump Cutaway (Wilden/ARO/Price) (278-180) depicts a sectioned industrial air-operated, double-diaphragm pump (AOD) cutaway that supports realistic classroom training in the operation, construction, and maintenance of this common process pump used in various industry sectors. -
Item Number:283DAC Worldwide’s Air-Cooled (Fin-Fan) Heat Exchanger Model (283) displays a scale version of an air-cooled, fin-tubed heat exchanger used in refineries, petrochemical plants, gas treating plants, power plants, and more. Air-cooled heat exchangers (ACHE), also called fin-fans or air coolers, cool or condense hot fluid in industrial process applications by passing ambient air over and between tubes used to move the fluid. The heated air is then discharged into the atmosphere. -
Item Number:275-180DAC Worldwide’s Air-Operated Diaphragm Pump Dissectible (Wilden/Aro/Price) (275-180) is a realistic dissectible industrial pump for use in classroom and laboratory training relating to process pumps. -
Train airport ground support crews in a safe, immersive environment with the Acron Aviation Airside Pushback™ Simulator. Realistic vehicle dynamics, 4K visuals, and Replay Studio™ After-Action Review software improve performance and reduce risk. -
Item Number:TFX-APLPB-1The TacMed Simulation AirwayPlus Lifecast Upper (APL) trains responders to perform life-saving tasks such as maintaining a patient’s airway, needle decompression, chest tube insertion, cricothyroidotomy, and Intraosseous (I/O) infusion. -
AlienGo is the A1's big brother. Stokes Education curriculum is included in our education package. Our curriculum has students work with community partners to utilize the robot in addressing real-world problems. -
For agriculture skills training, Amatrol offers training programs that feature a combination of learning methods to engage students' learning styles. Amatrol's training solutions include eLearning curriculum and hands-on, industrial-quality training systems for both industry and education settings. -
Item Number:850-AECAmatrol’s Alternative Energy Learning System – Wind and Solar (850-AEC) covers basic alternative energy training through a combination of eLearning curriculum and hands-on experience.
