Amatrol’s High School Learning Systems create the need for students to want to learn math and science – they can’t interact with the exciting technology without it. Learning is interactive and challenging, keeping them engaged and wanting to do more. The math and science so desperately needed for 80% of jobs today is a natural outcome.
Welcome to a new era in 3D Scanning
peel3 is an affordable turnkey and professional-grade 3D scanning that packs a jaw-dropping punch. Get your 3D scanning job done right the first time.
The Advanced Technical Skills Map is a visual guide to Amatrol’s Learning Systems. It provides an overview of available systems and recommendations for course sequence and prerequisites.
Item Number T7017A
Amatrol’s AC/DC Electrical Training System (T7017A) explores the fundamental concepts of AC and DC electrical systems. Learners will see how electricity is used for power and control in industrial, commercial, agricultural, and residential applications. This training system covers industry-relevant technical skills, including operating, installing, designing, and troubleshooting basic AC and DC electrical circuits for various applications.
The T7017A includes a bench top-mount workstation, lamp module assembly, pushbutton switch module assembly, selector switch module assembly, circuit breaker module assembly, handheld digital meter, and much more! Learners will use these components to study topics such as manual input devices, voltage measurement, lighting circuits, voltage dividers, and troubleshooting. This system uses industrial-quality components for durability to stand up to frequent use and to help learners become better prepared for what they will encounter on the job.
Need more instructional flexibility in your technical training program? Then look no further than Amatrol’s Virtual Simulators.
With its hands-on, interactive technical skill development, students using Amatrol’s Virtual Simulators get the look and feel of using real industrial equipment via their computers. Backed by stunning graphics and easy-to-use interactivity, users will perform the same industry-based tasks they would using equipment hardware, developing skills desperately needed in today’s modern manufacturing environment.
Virtual Simulators come standard with more than 20 Amatrol training systems spanning several different technologies, including: electrical, electronics, fluid power, machining, manufacturing processes, mechanical, and quality assurance.
With practical knowledge and direct application of skills to modern industry, Amatrol’s Virtual Simulators gives your program the hands-on skill development it needs to take your technical training to the next level.
Amatrol’s multimedia curriculum engages learners with interactions that are relevant to the topic that are designed to enhance comprehension.
This video provides a small sample of Amatrol’s extensive eLearning library, which contains hundreds of courses and thousands of training hours.
Many Courses Available in Spanish with more on the way!
Amatrol’s eLearning has expanded to include over 250 eLearning courses in Spanish, and more courses are on the way! Today’s workforce is truly global. Using eLearning which covers two of the world’s most spoken languages, provides a greater opportunity to reach more people and achieve a higher success rate. Although English is the most spoken language in the world, confusion during training can be avoided by offering courses in someone’s native language. Also, an individual’s ability to take a course in their native language may allow them to proceed through the courses more quickly, thereby reducing training costs.
Amatrol’s AC / DC Electrical Learning System (T7017A) explores the fundamental concepts of AC and DC electrical systems. Learners will see how electricity is used for power and control in industrial, commercial, agricultural, and residential applications. This training system covers industry-relevant technical skills, including operating, installing, designing, and troubleshooting basic AC and DC electrical circuits for various applications.
Simlog’s Forklift Personal Simulator Version 2 puts trainees at the controls of a typical sit-down, counter-balanced factory forklift with rear-wheel steering. Training scenarios are typical of factories, warehouses, and distribution centers, with various loads and storage arrangements, truck bays for loading and unloading, and a flatbed truck outside.
Simlog’s Replica Controls for the Forklift Personal Simulator are the most cost-effective set-up option and feature industrial strength components suitable for table-top mounting and Simlog’s Operator Chair. If you are a Simlog customer, you may be able to re-use the Replica Controls that you already have.
You will need three or four USB-ready Forklift Levers. (The fourth lever controls the separation of the forks, so if you use three levers instead of four, the simulation software will change the separation of the forks for you.) Simlog’s table-top mounting brackets will bring the joysticks down from table-top height to the sides of an ordinary chair, to better mimic the positioning of real controls in the cabin of real heavy equipment.
To complete the Replica Controls, add the Logitech “G920 Driving Force Racing Wheel” consisting of a steering wheel and a three-pedal unit, and the “G920 Driving Force Shifter,” a gear shifter that can also be used with many other Personal Simulators. In most countries, the G920 is for sale in retail stores that sell computers or video games, but it may also be purchased from Logitech’s online store. Logitech’s previous version, the “G27 Racing Wheel” can still be used.
Key Benefits:
- Easy to assemble USB controls
- Lightweight and portable
- Ability to create your own operator chair
- 3 or 4-lever configurations available
Possible Setups
There are four commonly used arrangements, one with a single display in front, one with a first display in front and a second display in back (to teach people to turn their heads to look behind when backing up), one with three displays in front arranged side-by-side in portrait mode and one with three displays in front and a fourth display in back.
Custom Travel Cases for Replica Controls
For all setups, Simlog’s Custom Travel Case makes transportation easy.
Key Features
- Made-to-measure, with dedicated slots for levers, joysticks, pedals, steering wheel, and table-top mounting brackets
- Space for a laptop PC, cables, and documentation
- Pull-out handle, with multiple positions
- Wheels (casters)
- Cases are “stackable,” for easy transport.
Specifications
- Overall dimensions: 30″ x 24″ x 19″
- Approximate weight: 50 lbs. when empty, up to 100 lbs. when full (depending upon the Replica Controls.)
Simlog's Forklift training person simulator features fifteen modules of increasing difficulty. Module 4: Slalom 3 - Reverse, Tall Loads has trainees pick up the load, drive through the slalom course in reverse, and place the load on the floor at the target position defined by a red outline.
Simlog's Forklift training person simulator features fifteen modules of increasing difficulty. Module 11: Loading Docks 6, Loading, to Maximize Cube Utilization has trainees working with trucks at the loading docks, picking up each marked load from the loading dock and placing it at an appropriate position inside the truck.
The goal is to minimize wasted space with a compact arrangement of loads in the truck, either on the truck floor or stacked on other loads while giving special consideration to any tall or hazardous loads.
Module 12: Selective Pallet Racks 1 - Low Shelves has trainees working with selective pallet racks, picking up each marked load, and placing it at its target position, defined by an outline of the same color as the load, using the overhead map for guidance.
The loads and their target positions are limited to the floor or first shelf in the racks.
Pages
-
-
Item Number:BH-85Each Basic Hydraulics training system features standard industrial grade components. This attention to quality gives students experience they would normally only get on-the-job by helping them recognize industrial components and how to troubleshoot them more effectively. Components included with Basic Hydraulics are pre-mounted on circuit panels with silk-screened labels next to each, which facilitates ease of use and identification. -
Item Number:85-BPAmatrol’s Basic Pneumatics training system (85-BP) introduces pneumatic principles through a combination of Amatrol’s top-flight multimedia curriculum with hands-on industrial pneumatic skill-building. Topics covered in this learning system include single-acting cylinder circuits, pressure vs. cylinder force, and flow control valves, while the panels can be used to practice skills such as connecting and operating a needle valve to control actuator speed. -
Item Number:85-EHThe Electro-Hydraulics training system includes an electrical control panel with relay control components and an electrical valve module with solenoid-operated hydraulic directional control valves and electrical/electronic sensors. These components will be used to study a variety of topics including electrical control systems, basic control devices, power devices, control relays, sequencing control, timer control, pressure control applications, and circuit applications. -
Item Number:CR-35iAFANUC’s new CR-35iA is the world’s first collaborative robot with a payload capacity of up to 35 kg. Fenceless, it opens a whole new world of possibilities. Working safely side by side with human operators, it is space as well as cost saving. And because inside it’s like any other FANUC robot, it operates like all FANUC robots. Certified to meet the requirements of ISO 10218-1:2011 and RIA/ANSI R15.06-2012, FANUC’s CR-35iA collaborative robot can work in a variety of applications alongside human workers including: machine tending, handling heavy payloads that require lift assist devices or custom equipment, higher payload mechanical assembly, palletizing or packing, and tote or carton handling. -
Item Number:CR-4iACR-4iA is a small collaborative robot with 4 kg payload -
Item Number:CR-7iAThe FANUC CR-7iA is FANUC's newest collaborative robot resembles the LR Mate family. Painted green to show it's ability to work beside humans, you can expect the same reliability as FANUC's yellow robots. The CR-7iA is ideal for small part sorting and assembly, inspection, machine tending, and part delivery. It has a 7 kg payload, 717 mm reach, and is equipped with iRVision and Force Sensing. There are a variety of mounting options such as floor, wall, and ceiling. -
FANUC’s new SCARA robots are ideal for high-speed, precision applications such as assembly, pick and place, testing/inspection and packaging processes. -
In the rare event that a burning ember or spark is drawn into the fume extraction unit, there is the possibility that debris in the filters could ignite. Although any resultant fire would typically be retained within the fume extraction unit, this would cause significant damage and in extreme circumstances, the risk may extend beyond the extraction unit. For processes where such risks have been identified, additional protection in the form of an in-line firebox is an additional precaution.
-
The BOFA inline pre-filter 1000 has been designed specifically for applications that generate high amounts of dust or particulate.
This inline filter unit is positioned alongside the main BOFA fume filtration system to increase the overall filter capacity and extend the life of the main filters. The DeepPleat DUO pre-filter incorporates a massive drop-out chamber within the filter, having a volume area of 15ltrs. Above the drop-out chamber but still within the housing there is a sealed 200mm deep pleat layer of F8 media giving a surface area in excess of 30 sq meters.
