DAC Worldwide’s Motor Load Option (419-000) is a component part of the DAC Worldwide Motor Fundamentals Training System (410-000) that adds a consistent, measured load to the 410-000’s system motors so that learners can study the operating characteristics of different motor types while under load.
Simlog's Hydraulic Excavator Personal Simulator puts trainees at the controls of a modern Hydraulic Excavator in interaction with an articulated dump truck. Using life-like dynamic terrain combined with our intelligent instructional design, your trainees are guided through a series of 12 skill-building Simulation Modules.
Watch the video for a demonstration of the Bench Loading with Truck Spotting - Boulders Module, one of 12 skill-building simulation modules of the Simlog Hydraulic Excavator Personal Simulator.
Simlog Bulldozer Personal Simulator's Boulder Control Module has trainees pushing a boulder to the target position. Each trial ends when the boulder is at the target position (the boulder will turn green), and the operator activates the horn.
Simlog Mobile Crane Personal Simulator's Pole Topping Module has trainees lifting a rubber tire load onto the tops of a series of poles in order. The target pole is marked with blue rings that will turn green once the pole has been topped.
Simlog Mobile Crane Personal Simulator's Pole Placement Module has trainees carefully lift the pole off the ground and then place it into the target hole (the target changes color as the pole gets closer) while avoiding obstacles and unstable positions.
Simlog Mobile Crane Personal Simulator's Corridor Following 4 Module has trainees move the concrete bucket along the three-section, z-shaped corridor on the ground from one end to the other, keeping the bucket at a constant height directly above the corridor while controlling sway.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Mobile Crane Personal Simulator's Pick, Lift, and Place Module has trainees configure the boom angle, extension mode, and length and then place the hook in the rigging target (blue sphere) above the load. Once triggered, lift the load and place it into the target. Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the operator activates the horn.
Simlog Mobile Crane Personal Simulator's Signaling Module has trainees move a load to a target destination hidden from the view of the crane operator, and so a signal person is required.
The signal person must view the lift using the dedicated signal-person display and provide hand or voice signals to the crane operator to safely move the load into the target (the target changes color as the load gets closer).
Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the crane operator activates the horn. Telescope extend/retract control is disabled for this module.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog Off-Highway Truck Personal Simulator's Corridor Driving 1 Module has trainees drive the truck through the corridor to the target. Each trial ends when the truck is over the target and parked (gear in Park, or gear in Neutral with parking brake engaged).
Pages
-
Item Number:419-000 -
Item Number:212-000DAC Worldwide’s Motorized Multi-Turn Valve Actuator Trainer (212-000) is a multi-functional device used for hands-on multi-turn actuator training. -
Item Number:286Tech-Labs technical training solutions. -
Item Number:287DAC Worldwide’s Multi-Pass Floating Head Heat Exchanger Training Model (287) is a highly-detailed scale model of a multi-pass, floating head, heat exchanger, supporting training in the operation and maintenance of industrial heat exchangers. -
Item Number:275-160-PAC / 275-160G-PACDAC Worldwide’s Multi-Stage, Split Case Pump Dissectible 275-160-PAC is an industrial pump for hands-on training relating to process pumps. -
Build a future-ready STEM and CTE classroom with the NeuroMaker Hand 2.0 – a programmable prosthetic hand kit that teaches biotechnology, robotics, and coding through real-world, hands-on learning. -
The Industrial Technology Maintenance (ITM) certification features nine stackable credentials allowing students to find a job while completing each duty area. -
Item Number:OHTThe simulation software puts you at the controls of a modern "rock truck" at work in a typical quarry, in interaction with a simulated Wheel Loader. You can even use the keyboard function keys and mouse controls during the simulation to change the point of view! -
Item Number:205-250DAC Worldwide’s Offset In-Line Helical Gear Reducer Cutaway (205-250) is one of an extensive series of actual industrial gear reducer cutaways for use in hands-on mechanical drives training in either the classroom or the laboratory. -
Item Number:205-150The dissectible features a carefully restored, sectioned, industrial offset in-line helical gear reducer to provide learners with a realistic training experience.
