DAC’s Axial Compressor Model (211A) depicts a highly detailed scale model depicting features of industrial axial air compressors commonly used in oil and gas production.
Somos® PerFORM™ produces strong, stiff, high-temperature-resistant composite parts that are ideal for tooling and wind-tunnel testing applications. With the lowest viscosity of any composite stereolithography material, parts made from Somos PerFORM are faster to build, easier to clean post-process, show superior sidewall quality, and provide unmatched detail resolution.
When you need a high-heat and humidity-resistant material for your parts, Somos® ProtoGen 18420 delivers the performance you need with accurate, easy-to-clean white parts.
Somos® ProtoGen 18420 helps our customers produce various part properties based upon the machine exposure that fit various applications.
Somos® ProtoGen™ 18420 was the first resin in stereolithography to demonstrate varied material properties based on machine exposure control. Now you can tailor parts to fit your unique needs, which makes it perfect for applications in the automotive industry and consumer products and electronics.
A fast-building stereolithography material specifically designed to deliver high-temperature resistance with exceptional surface finishing.
Somos® ProtoTherm 12120 stereolithography material is an excellent solution for applications requiring resistance to heat and humidity.
Somos® ProtoTherm 12120 excels at producing highly detailed, extremely accurate parts. The material is dimensionally stable when exposed to heat and humidity. It is a good candidate for high-temperature fluid flow analysis, functional prototypes, and limited-run, non-critical end-use parts such as wiring harnesses and support connectors in electronic devices.
For the automotive and aerospace sectors, our Somos® ProtoTherm™ 12120 materials deliver high-temperature resistance with exceptional surface finishing — a perfect combination for simplifying wind tunnel trials. This resin also offers superior dimensional stability, making your parts robust for testing.
A robust material with an unparalleled thermal and mechanical performance combination.
Somos® Taurus brings a combination of thermal and mechanical performance that previously was not possible with stereolithography materials. Its robustness combined with a charcoal gray appearance makes it ideal for the most demanding functional prototyping and end-use applications. Parts printed with this material are easy to clean and finish. The higher heat deflection temperature of Somos® Taurus increases the number of applications for the part producer and user.
Somos® TaurusTM brings the combination of thermal and mechanical performance that until now was not possible with stereolithography materials. Its robustness combined with a charcoal grey appearance makes it ideal for the most demanding functional prototyping and even end-use applications.
An optically clear stereolithography material tailored for colorless, functional parts with excellent temperature resistance.
Somos® WaterClear Ultra 10122 is an optically clear stereolithography material that is easy to use and fast to build. This material produces colorless, functional, and accurate parts that simulate an acrylic appearance. Parts produced with Somos® WaterClear Ultra 10122 exhibit excellent temperature resistance.
Somos® WaterClear Ultra 10122 is ideal for applications such as master patterns, concept, and functional models. This material also provides refractive values similar to engineered plastics for functional testing in optical light transmission work.
Somos® WaterClear® Ultra 10122 is an optically clear stereolithography material that is easy to use and fast to build. This stereolithography material produces colorless, functional, and accurate parts that simulate an acrylic appearance. Parts produced with Somos WaterClear Ultra 10122 exhibit excellent water and temperature resistance.
Somos® WaterShed AF is a multi-purpose stereolithography resin that meets the requirements for investment casting patterns. With processing and properties similar to Somos® WaterShed XC 11122, this resin can also be used for general-purpose prototyping and other applications.
Pages
-
Item Number:211A -
Release B1, protection grade IP68, focus on industrial landing, industrial super-large payload, dust-proof and waterproof. -
Item Number:BHLSimlog’s new Backhoe Loader Personal Simulator puts you at the controls of a backhoe loader (BHL), also called “Loader Backhoe” and “Tractor Loader Backhoe (TLB), at work in a typical construction site. Special configuration parameters allow instructors to modify the 3D modeling to select one of five possible color combinations and set the number of lift arm cylinders to one or two. This flexibility makes the simulated Backhoe Loader look like the equipment sold by all the leading OEMs. -
Item Number:253DAC Worldwide’s Ball Valve Cutaway (253) takes classroom training in the operation, construction, and maintenance of an industrial ball valve and enhances it by providing a visual, hands-on learning aid. The fully-detailed examples of industrial downsized valves give learners a first-hand view inside a component that is found in various maintenance applications worldwide. -
Item Number:295-711DAC Worldwide’s Barrel Choke Valve Cutaway (295-711) is an industrial valve sample for training in the operation, construction, and maintenance of a fixed (bean-type) choke valve. -
Item Number:208D-000Tech-Labs technical training solutions. -
Item Number:208D-PACDAC Worldwide’s Basic Coupling/Shaft Alignment Training System Plus (208D-PAC) is a heavy-duty, precision learning package that allows for convenient, realistic training in shaft alignment. -
Item Number:85-MT2Amatrol’s Basic Electrical Machines Learning System (85-MT2) teaches electric machines commonly found in industrial, commercial, and residential applications: single phase AC motors, three-phase AC electric motors, and DC electric motors. -
Item Number:850-HD1Amatrol’s Basic Hydraulics Training System – Double-Sided A-Frame Bench with Two Hydraulic Manifolds (850-HD1) features one set of basic hydraulics panels with the option to add another set to the opposite side to double your training capacity. -
Item Number:461-000DAC Worldwide’s Basic PLC Training System – AB Micro850 (461-000) is a self-contained PLC training system that allows for self-directed instruction related to the programming and application of industrial PLCs.
